When storing Protective film , we must first pay attention to store it in the warehouse to avoid the phenomenon of sun exposure or rain. In addition, we must pay attention to Protective film. In fact, we must prohibit it from contacting with the organic solvent of acid and alkali oil, pay attention to keep it clean and dry, pay attention to the distance of -15 °C ~ 40 °C.
When storing Protective film, it should be placed in a roll, not folded. When the storage time is too long, it should be turned once every season. When loading and unloading the conveyor belt, it is best to use the crane, and pay attention to the rigging with the beam to carry out the sling smoothly, to avoid the phenomenon of damage to the belt edge, pay attention not to load and unload arbitrarily.
When storing Protective film, we must pay attention to its type and its specifications, and pay attention to its reasonable use according to its needs and specific conditions. If different varieties and their different specifications are not allowed, the protective film of its strength and the number of layers thereof is directly connected (grouped) for use.
The PE protective film can be stored indoors for 12 months in a warehouse without direct sunlight since the day of production. The higher the temperature, the shorter the storage period, and the storage period will be reduced by half for every 10 degrees. Water-soluble protective film should avoid contact with water vapor to avoid residual glue