What should you pay attention to when PE protective film for laminated floor?

- May 20, 2019-

PE protective film for laminated floor wants to achieve good results, the surface of the material must be clean and dry. It is generally recommended to use a mixture of isopropyl alcohol and water in a 1:1 ratio to clean the surface. The water is completely evaporated and the surface is completely dry. The laminate flooring was adhered to the surface of the PE protective film for laminated floor, and a pressure of about 1.05 kg/cm 2 was applied by roller or the like to make it adhere effectively. 

Follow the bonding method of the protective film from point to line to surface contact surface. Use a plastic scraper or roller in a manual fit to fit evenly. Make sure that the pressure has been applied to the rubber surface before the glue contacts the sticker to prevent air from entering.

The PE protective film for laminated floor release paper. If the air is not present between the glue and the object in the previous step, it is ensured that no air bubbles will be generated, and then the material to be bonded is attached. Apply a certain amount of pressure to make it fit perfectly. If you want to remove the air bubbles, it is recommended to increase the pressure to the limit of the item. 

A more realistic and ideal construction temperature is recommended between 15 ° C and 38 ° C and not below 10 ° C. To maintain a stable quality when the protective film is stored, it is recommended that the storage environment be 21 ° C relative humidity. When using a substrate-free protective film, do not touch the protective film when processing the edge of the cut shape to avoid glue.

www.pe-protectionfilm.com