Protective film for Aluminum extrusive profile used according to the degree of adhesion

- Mar 11, 2019-

Protective film for Aluminum extrusive profile is usually used to package goods, as well as dust, scratch, oil, fingerprints and so on. Nowadays, many products for sale generally have a protective film on the surface, so the market for protective film is very large, whether it is between a color or a transparent aluminum extruded protective film and a protected product, pay attention to the surface of the profile. Effective cleaning will avoid problems.

 

It is well known that in today's aluminum extrusion type protective film market, they have different ways of using depending on the viscosity. Of course, as the viscosity increases, the material to be pasted is different. If we can see the viscosity standard of the aluminum extrusion type protective film, then we can determine the paste-protected product according to the viscosity. We must pay attention to the higher the viscosity, the more products that can be pasted, the more Products that are not adhesive can also be easily adhered.

 

For example, a high-viscosity aluminum extrusion type protective film can be attached to a coarse-grained aluminum plate. When sticking the product, if there is a phenomenon of peeling, we should not consider the product's failure, which may be caused by insufficient viscosity. Therefore, it is the best way to replace the high-viscosity aluminum extrusion type protective film.

 

https://www.pe-protectionfilm.com/