How do we clean the protective film in daily life?

- Oct 26, 2020-

With the improvement of living standards, TVs, computers and other products have become quite popular, so the corresponding protective film products are becoming more and more popular. The function of the protective film here is to prevent the LCD screen from being damaged, and also to facilitate the cleaning of the LCD screen.

Although it is known that a protective film can be pasted on the LCD screen to protect it, it is not known that the protective film here can be cleaned in different ways.

One is to use a special dust-removing sticker for the protective film to clean. It can not only clean the screen, but also damage the protective film and the screen. When operating, first stick the dust removal sticker on the protective film, tear off the dust removal sticker again, and stick it to the corner of the protective film. And press the dust removal sticker firmly to make it adhere to the protective film. Pull up the film in the opposite direction, and a corner of the protective film will be immediately pulled up. At this time, you can stick the second piece of dust removal sticker on the inside of the adsorption layer of the protective film, corresponding to the position of the first piece of dust removal sticker. Tear off the protective film.

After cleaning, re-attach the protective film. Since the adsorption layer of the protective film is less protected by the release film, you must be extra careful when re-attaching to avoid damaging the protective film.

Of course, the protective film can also be washed with water. Prepare a larger cup and fill it with pure water; then use a dust removal sticker to remove the protective film from the screen and put the protective film in water to wash back and forth. After washing the protective film, take it out of the water and place it in a cool place.

It is recommended to lean the protective film on the cup so that the protective film adsorption layer is downward, and re-attach it after the water drops are completely dried. Keep in mind that the protective film must be dried naturally after washing. Do not use a soft cloth to wipe the absorbent layer, otherwise it will stick to dust. If you accidentally stick to the dust, you can repeat the water washing once.