When trimming the glass protective film, it should be noted that the size of the film should be larger than that of the glass, so as to facilitate future repairs. In fact, such films are generally two-layered, one is colored and the other is transparent Yes, when the protective film is attached to the glass, in order to avoid air bubbles at this time, you need to scrape the moisture inside in four directions.
Precautions for glass protective film:
When wiping the glass protective film, you must pay attention to checking the tools used. Do not show any unevenness or nicks. When the film is cut, you need to pay special attention to the size and quantity of the glass. Measure on the same side of the glass. When cutting, you also need to align the center of the edge of the film to cut. After the film is pasted, you can spray a small amount of detergent on it, which can effectively remove the residual surface Objects and then wipe them clean with a rag
In fact, glass protective film is very useful in our daily life. It is because of these advantages and the benefits of use that it will be liked by many customers in the market. The heat insulation film on the product has strong safety performance when used. , It also has glass fragment holding performance, so the safety performance of such products is higher than that of tempered glass, but remind everyone to choose regular manufacturers when purchasing protective films.https://www.pe-protectionfilm.com/